Moisture is one of the main reasons for the deterioration of paint walls, both indoors and outdoors. Virtually no paint that resists, so it is better to stop the advance of moisture to keep the surfaces in good condition.
But remove moisture is a difficult problem to solve. It can come from pipes with water leaks, condensation, leakage from the outside or from the ground. In each case there are several solutions that eliminate or palliate its effects.
1. Moisture pipe breaks
If moisture is produced by a pipe or pipe that is in poor condition causing lost, it is enough to locate and repair the drawback, bringing the moisture gradually disappear. After a couple of months the wall will be able to be revoked and painted again.
2. Moisture from abroad
In the case the outer edge wall where to be in constant contact with water, such as a garden, a chute or heavy rain, it is recommended to weatherproof membrane with some form of bituminous paint or to prevent the passage of water moisten the wall.
The temperature differences between the interior and exterior of a home, plus the humidity cause the same water in gas state adheres to the walls and keep constantly moist, causing mold growth and deterioration of paint . Proper ventilation of the environment is one of the solutions.
3.Moisture in foundations and walls
The most common case is the moisture that comes from the earth goes foundations and flourishes within a few centimeters of soil deterioration not only painting, but also the lower layers of plaster or gypsum. There are two ways to eliminate or mitigate the effect caused by moisture. One is waterproof the wall injection treatments products, or placing anti-humidity plates.