Have you held a cookout? To have the table cleared of accessories, we have created a practical solution vertically from a pallet. Then you can use for your garden tools or filling plant.
1. A DIY Pot ORGANIZER FOR THE GARDEN.
Make this craft is easy but note that you have to consider safety. Manipulate the cut wire is dangerous; therefore, we recommend that you put gloves when doing this craft to avoid untimely accidents.
– A pallet .
– metallic fabric henhouse.
– Upholstery Stapler and sandpaper.
– Scissors. All material is Leroy Merlin.
STEP 1: PREPARE THE PALLET
Fill the Pallet with the sand, pay special attention to corners. Spread the chicken wire on the ground and placed over the pallet. Put it up, stretching the fabric to cover it and cut the excess with pliers.
STEP 2: PLACE THE WIRE
Note that the fabric is tight, so you’ll need two strips. Attach them amidst the pallet by staples. Well then stretch each strip to reach the ends and fold the fabric to completely cover the edges of the pallet. Hang as many pots as you need to keep handy cutlery, sauces, napkins, ice.
STEP 3: STAPLE THE FABRIC TO THE PALLET
After placing the fabric and folded at its ends, starts to fix the pallet with the help of the stapler. Start stapled by an edge behind the pallet, continues along the top and bottom center and ends at the opposite end.
STEP 4: HANG PLANTERS
Place separated by different areas of the fabric and secure with string or wire pots. Place a planter on top. If you place the other in the middle of the pallet , you have to cut a little chicken wire to fit the hooks.